Maple Twin Laser 3 point

The Maple Twin Laser is a clap skate with a specially shaped tension and torsion-free steel skate tube.
The tube has a reintegrated rib that gives the blade is more stable in corners.
Corners can be made ​​at top speed.
On the straight the energy can be converted into a maximum speed.

The blade is built up from steel PM-65 HRC with a thickness of 1.1 mm and is made ​​1 mm higher than the Comet laser.
The flange is in comparison with the ordinary lasers is slightly thinner so that the iron has a better flex.

Applied at the Maple Twin Laser 3-point three-point skate was invented by Mark Cuperusstraat old owner of Raps. The three-point principle of Maple Twin Laser point 3 ensures that the chosen curve really is retained for marketing. Is the curvature, as it were pressed flat because the two points of the front and rear center of the rounded down. At the normal (2 point) skating The third fulcrum is right above the middle of the curve and cared for so that it also will remain really saved, resulting in a much better control of the skate.